Information for ArmVersatileExpress-CA9

This page provides detailed information about the arm.ovpworld.org ArmVersatileExpress-CA9 Virtual Platform / Virtual Prototype.

Licensing
Open Source Apache 2.0

Description
This platform models the ARM Versatile Express development board with a CoreTile Express A9x4 (V2P-CA9) Daughterboard. See the ARM documents DUI0447G_v2m_p1_trm.pdf and DUI0448G_v2p_ca9_trm.pdf for details of the hardware being modeled. Note this platform implements the motherboard's 'Legacy' memory map. The default processor is an ARM Cortex-A9MPx4, which may be changed.

Limitations
This platform provides the peripherals required to boot and run Operating Systems such as Linux or Android. Some of the peripherals are register-only, non-functional models. See the individual peripheral model documentation for details. The TrustZone Protection Controller (TZPC) is modeled, the TrustZone Address Space Controller (TZASPC) is not modeled. CoreSight software debug and trace ports are not modeled.

Reference
ARM Development Boards Versatile Express BaseBoard and ARM CoreTile Express A9x4

Location
The ArmVersatileExpress-CA9 virtual platform is located in an Imperas/OVP installation at the VLNV: arm.ovpworld.org / module / ArmVersatileExpress-CA9 / 1.0.

Platform Summary

Table 1: Components in platform

TypeInstanceVendorComponent
Processorcpuarm.ovpworld.orgarmCortex-A9MPx4
PeripheralsysRegsarm.ovpworld.orgVexpressSysRegs
PeripheralsysCtrlarm.ovpworld.orgSysCtrlSP810
Peripheralsbpci0ovpworld.orgdummyPort
Peripheralaac1arm.ovpworld.orgAaciPL041
Peripheralmmc1arm.ovpworld.orgMmciPL181
Peripheralkb1arm.ovpworld.orgKbPL050
Peripheralms1arm.ovpworld.orgKbPL050
Peripheraluart0arm.ovpworld.orgUartPL011
Peripheraluart1arm.ovpworld.orgUartPL011
Peripheraluart2arm.ovpworld.orgUartPL011
Peripheraluart3arm.ovpworld.orgUartPL011
Peripheralwdt1arm.ovpworld.orgWdtSP805
Peripheraltimer01arm.ovpworld.orgTimerSP804
Peripheraltimer23arm.ovpworld.orgTimerSP804
Peripheraldvi1arm.ovpworld.orgSerBusDviRegs
Peripheralrtc1arm.ovpworld.orgRtcPL031
Peripheralcf1arm.ovpworld.orgCompactFlashRegs
Peripheralclcdarm.ovpworld.orgLcdPL110
Peripherallcd1arm.ovpworld.orgLcdPL110
Peripherallcd1NSovpworld.orgDynamicBridge
Peripheraldmc1arm.ovpworld.orgDMemCtrlPL341
Peripheraldmc1NSovpworld.orgDynamicBridge
Peripheralsmc1arm.ovpworld.orgSMemCtrlPL354
Peripheralsmc1NSovpworld.orgDynamicBridge
Peripheralscc1ovpworld.orgdummyPort
Peripheralscc1NSovpworld.orgDynamicBridge
Peripheraltimer45arm.ovpworld.orgTimerSP804
Peripheraltimer45NSovpworld.orgDynamicBridge
Peripheralwdt2arm.ovpworld.orgWdtSP805
Peripheralwdt2NSovpworld.orgDynamicBridge
Peripheraltzpcarm.ovpworld.orgTzpcBP147
Peripheralgpio0ovpworld.orgdummyPort
Peripheralfaxi1ovpworld.orgdummyPort
Peripheralfaxi1NSovpworld.orgDynamicBridge
Peripheralsaxi1ovpworld.orgdummyPort
Peripheralsaxi1NSovpworld.orgDynamicBridge
Peripherall2regsarm.ovpworld.orgL2CachePL310
Peripheralnor0intel.ovpworld.orgNorFlash48F4400
Peripheralnor1intel.ovpworld.orgNorFlash48F4400
Peripheraleth0smsc.ovpworld.orgLAN9118
Peripheralusb0philips.ovpworld.orgISP1761
PeripheralsmartLoaderarm.ovpworld.orgSmartLoaderArmLinux
Memorysram1ovpworld.orgram
Memoryvram1ovpworld.orgram
Memoryddr2ramovpworld.orgram
BustzBus(builtin)address width:41
BuspBus(builtin)address width:32
Busddr2bus(builtin)address width:32
Bridgesecure(builtin)
BridgesysRegsNS(builtin)
BridgesysCtrlNS(builtin)
Bridgeaac1NS(builtin)
Bridgemmc1NS(builtin)
Bridgekb1NS(builtin)
Bridgems1NS(builtin)
Bridgeuart0NS(builtin)
Bridgeuart1NS(builtin)
Bridgeuart2NS(builtin)
Bridgeuart3NS(builtin)
Bridgewdt1NS(builtin)
Bridgetimer01NS(builtin)
Bridgetimer02NS(builtin)
Bridgedvi1NS(builtin)
Bridgertc1NS(builtin)
Bridgecf1NS(builtin)
Bridgelcd2NS(builtin)
Bridgel2regsNS(builtin)
Bridgenor0NS(builtin)
Bridgenor1NS(builtin)
Bridgesram1NS(builtin)
Bridgevram1NS(builtin)
Bridgeeth0NS(builtin)
Bridgeusb0NS(builtin)
Bridgeddr2RamBridge(builtin)
Bridgeddr2ramNS(builtin)
Bridgeddr2RemapBridge(builtin)
Bridgeddr2RemapBridgeNS(builtin)


Platform Simulation Attributes

Table 2: Platform Simulation Attributes

AttributeValueDescription
stoponctrlcstoponctrlcStop on control-C



Processor [arm.ovpworld.org/processor/arm/1.0] instance: cpu

Processor model type: 'arm' variant 'Cortex-A9MPx4' definition
Imperas OVP processor models support multiple variants and details of the variants implemented in this model can be found in:
- the Imperas installation located at ImperasLib/source/arm.ovpworld.org/processor/arm/1.0/doc
- the OVP website: OVP_Model_Specific_Information_arm_Cortex-A9MPx4.pdf

Description
ARM Processor Model

Licensing
Usage of binary model under license governing simulator usage.
Note that for models of ARM CPUs the license includes the following terms:
Licensee is granted a non-exclusive, worldwide, non-transferable, revocable licence to:
If no source is being provided to the Licensee: use and copy only (no modifications rights are granted) the model for the sole purpose of designing, developing, analyzing, debugging, testing, verifying, validating and optimizing software which: (a) (i) is for ARM based systems; and (ii) does not incorporate the ARM Models or any part thereof; and (b) such ARM Models may not be used to emulate an ARM based system to run application software in a production or live environment.
If source code is being provided to the Licensee: use, copy and modify the model for the sole purpose of designing, developing, analyzing, debugging, testing, verifying, validating and optimizing software which: (a) (i) is for ARM based systems; and (ii) does not incorporate the ARM Models or any part thereof; and (b) such ARM Models may not be used to emulate an ARM based system to run application software in a production or live environment.
In the case of any Licensee who is either or both an academic or educational institution the purposes shall be limited to internal use.
Except to the extent that such activity is permitted by applicable law, Licensee shall not reverse engineer, decompile, or disassemble this model. If this model was provided to Licensee in Europe, Licensee shall not reverse engineer, decompile or disassemble the Model for the purposes of error correction.
The License agreement does not entitle Licensee to manufacture in silicon any product based on this model.
The License agreement does not entitle Licensee to use this model for evaluating the validity of any ARM patent.
Source of model available under separate Imperas Software License Agreement.

Limitations
Instruction pipelines are not modeled in any way. All instructions are assumed to complete immediately. This means that instruction barrier instructions (e.g. ISB, CP15ISB) are treated as NOPs, with the exception of any undefined instruction behavior, which is modeled. The model does not implement speculative fetch behavior. The branch cache is not modeled.
Caches and write buffers are not modeled in any way. All loads, fetches and stores complete immediately and in order, and are fully synchronous (as if the memory was of Strongly Ordered or Device-nGnRnE type). Data barrier instructions (e.g. DSB, CP15DSB) are treated as NOPs, with the exception of any undefined instruction behavior, which is modeled. Cache manipulation instructions are implemented as NOPs, with the exception of any undefined instruction behavior, which is modeled.
Real-world timing effects are not modeled: all instructions are assumed to complete in a single cycle.
Performance Monitors are implemented as a register interface only.
TLBs are architecturally-accurate but not device accurate. This means that all TLB maintenance and address translation operations are fully implemented but the cache is larger than in the real device.

Verification
Models have been extensively tested by Imperas. ARM Cortex-A models have been successfully used by customers to simulate SMP Linux, Ubuntu Desktop, VxWorks and ThreadX on Xilinx Zynq virtual platforms.

Core Features
Thumb-2 instructions are supported.
Trivial Jazelle extension is implemented.

Memory System
Security extensions are implemented (also known as TrustZone). Non-secure accesses can be made visible externally by connecting the processor to a 41-bit physical bus, in which case bits 39..0 give the true physical address and bit 40 is the NS bit.
VMSA secure and non-secure address translation is implemented.

Advanced SIMD and Floating-Point Features
SIMD and VFP instructions are implemented.
The model implements trapped exceptions if FPTrap is set to 1 in MVFR0 (for AArch32) or MVFR0_EL1 (for AArch64). When floating point exception traps are taken, cumulative exception flags are not updated (in other words, cumulative flag state is always the same as prior to instruction execution, even for SIMD instructions). When multiple enabled exceptions are raised by a single floating point operation, the exception reported is the one in least-significant bit position in FPSCR (for AArch32) or FPCR (for AArch64). When multiple enabled exceptions are raised by different SIMD element computations, the exception reported is selected from the lowest-index-number SIMD operation. Contact Imperas if requirements for exception reporting differ from these.
Trapped exceptions not are implemented in this variant (FPTrap=0)

Generic Interrupt Controller
GIC block is implemented (GICv1, including security extensions). Accesses to GIC registers can be viewed externally by connecting to the 32-bit GICRegisters bus port. Secure register accesses are at offset 0x0 on this bus; for example, a secure access to GIC register ICDDCR can be observed by monitoring address 0x00001000. Non-secure accesses are at offset 0x80000000 on this bus; for example, a non-secure access to GIC register ICDDCR can be observed by monitoring address 0x80001000

Integration Support
This model implements a number of non-architectural pseudo-registers and other features to facilitate integration.

Memory Transaction Query
Two registers are intended for use within memory callback functions to provide additional information about the current memory access. Register transactPL indicates the processor execution level of the current access (0-3). Note that for load/store translate instructions (e.g. LDRT, STRT) the reported execution level will be 0, indicating an EL0 access. Register transactAT indicates the type of memory access: 0 for a normal read or write; and 1 for a physical access resulting from a page table walk.

Page Table Walk Query
A banked set of registers provides information about the most recently completed page table walk. There are up to six banks of registers: bank 0 is for stage 1 walks, bank 1 is for stage 2 walks, and banks 2-5 are for stage 2 walks initiated by stage 1 level 0-3 entry lookups, respectively. Banks 1-5 are present only for processors with virtualization extensions. The currently active bank can be set using register PTWBankSelect. Register PTWBankValid is a bitmask indicating which banks contain valid data: for example, the value 0xb indicates that banks 0, 1 and 3 contain valid data.
Within each bank, there are registers that record addresses and values read during that page table walk. Register PTWBase records the table base address. Registers PTWAddressL0-PTWAddressL3 record the addresses of level 0 to level 3 entries read, respectively, and register PTWAddressValid is a bitmask indicating which address registers contain valid data: for example, the value 0xe indicates that PTWAddressL1-PTWAddressL3 are valid but PTWAddressL0 is not. Registers PTWValueL0-PTWValueL3 contain entry values read at level 0 to level 3. Register PTWInput contains the input address that starts a walk and Register PTWOutput contains the result address (valid only if the page table walk completes). Register PTWValueValid is a bitmask indicating which value registers contain valid data: bits 0-3 indicate PTWValueL0-PTWValueL3, respectively, bit 4 indicates PTWBase, bit 5 indicates PTWInput and bit 6 indicates PTWOutput.

Artifact Page Table Walks
Registers are also available to enable a simulation environment to initiate an artifact page table walk (for example, to determine the ultimate PA corresponding to a given VA). Register PTWI_EL1S initiates a secure EL1 table walk for a fetch. Register PTWD_EL1S initiates a secure EL1 table walk for a load or store (note that current ARM processors have unified TLBs, so these registers are synonymous). Registers PTW[ID]_EL1NS initiate walks for non-secure EL1 accesses. Registers PTW[ID]_EL2 initiate EL2 walks. Registers PTW[ID]_S2 initiate stage 2 walks. Registers PTW[ID]_EL3 initiate AArch64 EL3 walks. Finally, registers PTW[ID]_current initiate current-mode walks (useful in a memory callback context). Each walk fills the query registers described above.

MMU and Page Table Walk Events
Two events are available that allow a simulation environment to be notified on MMU and page table walk actions. Event mmuEnable triggers when any MMU is enabled or disabled. Event pageTableWalk triggers on completion of any page table walk (including artifact walks).

Artifact Address Translations
A simulation environment can trigger an artifact address translation operation by writing to the architectural address translation registers (e.g. ATS1CPR). The results of such translations are written to an integration support register artifactPAR, instead of the architectural PAR register. This means that such artifact writes will not perturb architectural state.

Halt Reason Introspection
An artifact register HaltReason can be read to determine the reason or reasons that a processor is halted. This register is a bitfield, with the following encoding: bit 0 indicates the processor has executed a wait-for-event (WFE) instruction; bit 1 indicates the processor has executed a wait-for-interrupt (WFI) instruction; and bit 2 indicates the processor is held in reset.

System Register Access Monitor
If parameter enableSystemMonitorBus is True, an artifact 32-bit bus "SystemMonitor" is enabled for each PE. Every system register read or write by that PE is then visible as a read or write on this artifact bus, and can therefore be monitored using callbacks installed in the client environment (use opBusReadMonitorAdd/opBusWriteMonitorAdd or icmAddBusReadCallback/icmAddBusWriteCallback, depending on the client API). The format of the address on the bus is as follows:
bits 31:26 - zero
bit 25 - 1 if AArch64 access, 0 if AArch32 access
bit 24 - 1 if non-secure access, 0 if secure access
bits 23:20 - CRm value
bits 19:16 - CRn value
bits 15:12 - op2 value
bits 11:8 - op1 value
bits 7:4 - op0 value (AArch64) or coprocessor number (AArch32)
bits 3:0 - zero
As an example, to view non-secure writes to writes to CNTFRQ_EL0 in AArch64 state, install a write monitor on address range 0x020e0330:0x020e0333.

System Register Implementation
If parameter enableSystemBus is True, an artifact 32-bit bus "System" is enabled for each PE. Slave callbacks installed on this bus can be used to implement modified system register behavior (use opBusSlaveNew or icmMapExternalMemory, depending on the client API). The format of the address on the bus is the same as for the system monitor bus, described above.

Instance Parameters
Several parameters can be specified when a processor is instanced in a platform. For this processor instance 'cpu' it has been instanced with the following parameters:

Table 3: Processor Instance 'cpu' Parameters (Configurations)

ParameterValueDescription
endianlittleSelect processor endian (big or little)
simulateexceptionssimulateexceptionsCauses the processor simulate exceptions instead of halting
mips448.0The nominal MIPS for the processor

Table 4: Processor Instance 'cpu' Parameters (Attributes)

Parameter NameValueType
variantCortex-A9MPx4enum
compatibilityISAenum
UAL1bool
showHiddenRegs0bool
override_CBAR0x1e000000uns32


Memory Map for processor 'cpu' bus: 'tzBus'
Processor instance 'cpu' is connected to bus 'tzBus' using master port 'INSTRUCTION'.

Processor instance 'cpu' is connected to bus 'tzBus' using master port 'DATA'.

Table 5: Memory Map ( 'cpu' / 'tzBus' [width: 41] )

Lo AddressHi AddressInstanceComponent
0x00xFFFFFFFFsecurebridge
remappableremappabledmc1NSDynamicBridge
remappableremappablefaxi1NSDynamicBridge
remappableremappablelcd1NSDynamicBridge
remappableremappablesaxi1NSDynamicBridge
remappableremappablescc1NSDynamicBridge
remappableremappablesmc1NSDynamicBridge
remappableremappabletimer45NSDynamicBridge
remappableremappablewdt2NSDynamicBridge
0x100000000000x10003FFFFFFddr2RemapBridgeNSbridge
0x100100000000x10010000FFFsysRegsNSbridge
0x100100010000x10010001FFFsysCtrlNSbridge
0x100100040000x10010004FFFaac1NSbridge
0x100100050000x10010005FFFmmc1NSbridge
0x100100060000x10010006FFFkb1NSbridge
0x100100070000x10010007FFFms1NSbridge
0x100100090000x10010009FFFuart0NSbridge
0x1001000A0000x1001000AFFFuart1NSbridge
0x1001000B0000x1001000BFFFuart2NSbridge
0x1001000C0000x1001000CFFFuart3NSbridge
0x1001000F0000x1001000FFFFwdt1NSbridge
0x100100110000x10010011FFFtimer01NSbridge
0x100100120000x10010012FFFtimer02NSbridge
0x100100160000x10010016FFFdvi1NSbridge
0x100100170000x10010017FFFrtc1NSbridge
0x1001001A0000x1001001AFFFcf1NSbridge
0x1001001F0000x1001001FFFFlcd2NSbridge
0x1001E00A0000x1001E00AFFFl2regsNSbridge
0x100400000000x10043FFFFFFnor0NSbridge
0x100440000000x10047FFFFFFnor1NSbridge
0x100480000000x1004BFFFFFFsram1NSbridge
0x1004C0000000x1004C7FFFFFvram1NSbridge
0x1004E0000000x1004E000FFFeth0NSbridge
0x1004F0000000x1004F00FFFFusb0NSbridge
0x100600000000x1009FFFFFFFddr2ramNSbridge

Table 6: Bridged Memory Map ( 'cpu' / 'secure' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
0x00x3FFFFFFddr2RemapBridgebridge
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100000000x10000FFFsysRegsVexpressSysRegs
0x100010000x10001FFFsysCtrlSysCtrlSP810
0x100020000x10002FFFsbpci0dummyPort
0x100040000x10004FFFaac1AaciPL041
0x100050000x10005FFFmmc1MmciPL181
0x100060000x10006FFFkb1KbPL050
0x100070000x10007FFFms1KbPL050
0x100090000x10009FFFuart0UartPL011
0x1000A0000x1000AFFFuart1UartPL011
0x1000B0000x1000BFFFuart2UartPL011
0x1000C0000x1000CFFFuart3UartPL011
0x1000F0000x1000FFFFwdt1WdtSP805
0x100110000x10011FFFtimer01TimerSP804
0x100120000x10012FFFtimer23TimerSP804
0x100160000x10016FFFdvi1SerBusDviRegs
0x100170000x10017FFFrtc1RtcPL031
0x1001A0000x1001AFFFcf1CompactFlashRegs
0x1001F0000x1001FFFFclcdLcdPL110
0x100200000x10020FFFlcd1LcdPL110
0x100E00000x100E0FFFdmc1DMemCtrlPL341
0x100E10000x100E1FFFsmc1SMemCtrlPL354
0x100E20000x100E2FFFscc1dummyPort
0x100E40000x100E4FFFtimer45TimerSP804
0x100E50000x100E5FFFwdt2WdtSP805
0x100E60000x100E6FFFtzpcTzpcBP147
0x100E80000x100E8FFFgpio0dummyPort
0x100E90000x100E9FFFfaxi1dummyPort
0x100EA0000x100EAFFFsaxi1dummyPort
0x1E00A0000x1E00AFFFl2regsL2CachePL310
0x400000000x43FFFFFFnor0NorFlash48F4400
0x440000000x47FFFFFFnor1NorFlash48F4400
0x480000000x4BFFFFFFsram1ram
0x4C0000000x4C7FFFFFvram1ram
0x4E0000000x4E000FFFeth0LAN9118
0x4F0000000x4F00FFFFusb0ISP1761
0x600000000x9FFFFFFFddr2RamBridgebridge

Table 7: Bridged Memory Map ( 'cpu' / 'ddr2RemapBridgeNS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
0x00x3FFFFFFddr2RemapBridgebridge
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110

Table 8: Bridged Memory Map ( 'cpu' / 'sysRegsNS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100000000x10000FFFsysRegsVexpressSysRegs

Table 9: Bridged Memory Map ( 'cpu' / 'sysCtrlNS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100010000x10001FFFsysCtrlSysCtrlSP810

Table 10: Bridged Memory Map ( 'cpu' / 'aac1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100040000x10004FFFaac1AaciPL041

Table 11: Bridged Memory Map ( 'cpu' / 'mmc1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100050000x10005FFFmmc1MmciPL181

Table 12: Bridged Memory Map ( 'cpu' / 'kb1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100060000x10006FFFkb1KbPL050

Table 13: Bridged Memory Map ( 'cpu' / 'ms1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100070000x10007FFFms1KbPL050

Table 14: Bridged Memory Map ( 'cpu' / 'uart0NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100090000x10009FFFuart0UartPL011

Table 15: Bridged Memory Map ( 'cpu' / 'uart1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1000A0000x1000AFFFuart1UartPL011

Table 16: Bridged Memory Map ( 'cpu' / 'uart2NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1000B0000x1000BFFFuart2UartPL011

Table 17: Bridged Memory Map ( 'cpu' / 'uart3NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1000C0000x1000CFFFuart3UartPL011

Table 18: Bridged Memory Map ( 'cpu' / 'wdt1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1000F0000x1000FFFFwdt1WdtSP805

Table 19: Bridged Memory Map ( 'cpu' / 'timer01NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100110000x10011FFFtimer01TimerSP804

Table 20: Bridged Memory Map ( 'cpu' / 'timer02NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100120000x10012FFFtimer23TimerSP804

Table 21: Bridged Memory Map ( 'cpu' / 'dvi1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100160000x10016FFFdvi1SerBusDviRegs

Table 22: Bridged Memory Map ( 'cpu' / 'rtc1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x100170000x10017FFFrtc1RtcPL031

Table 23: Bridged Memory Map ( 'cpu' / 'cf1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1001A0000x1001AFFFcf1CompactFlashRegs

Table 24: Bridged Memory Map ( 'cpu' / 'lcd2NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1001F0000x1001FFFFclcdLcdPL110

Table 25: Bridged Memory Map ( 'cpu' / 'l2regsNS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x1E00A0000x1E00AFFFl2regsL2CachePL310

Table 26: Bridged Memory Map ( 'cpu' / 'nor0NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x400000000x43FFFFFFnor0NorFlash48F4400

Table 27: Bridged Memory Map ( 'cpu' / 'nor1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x440000000x47FFFFFFnor1NorFlash48F4400

Table 28: Bridged Memory Map ( 'cpu' / 'sram1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x480000000x4BFFFFFFsram1ram

Table 29: Bridged Memory Map ( 'cpu' / 'vram1NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x4C0000000x4C7FFFFFvram1ram

Table 30: Bridged Memory Map ( 'cpu' / 'eth0NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x4E0000000x4E000FFFeth0LAN9118

Table 31: Bridged Memory Map ( 'cpu' / 'usb0NS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x4F0000000x4F00FFFFusb0ISP1761

Table 32: Bridged Memory Map ( 'cpu' / 'ddr2ramNS' / 'pBus' [width: 32] )

Lo AddressHi AddressInstanceComponent
remappableremappableclcdLcdPL110
remappableremappablelcd1LcdPL110
0x600000000x9FFFFFFFddr2RamBridgebridge


Net Connections to processor: 'cpu'

Table 33: Processor Net Connections ( 'cpu' )

Net PortNetInstanceComponent
SPI34ir2timer01TimerSP804
SPI35ir3timer23TimerSP804
SPI36ir4rtc1RtcPL031
SPI37ir5uart0UartPL011
SPI38ir6uart1UartPL011
SPI39ir7uart2UartPL011
SPI40ir8uart3UartPL011
SPI41ir9mmc1MmciPL181
SPI42ir10mmc1MmciPL181
SPI44ir12kb1KbPL050
SPI45ir13ms1KbPL050
SPI46ir14clcdLcdPL110
SPI47ir15eth0LAN9118
SPI48ir16usb0ISP1761
SPI76ir44lcd1LcdPL110
SPI80ir48timer45TimerSP804



Peripheral Instances


Peripheral [arm.ovpworld.org/peripheral/VexpressSysRegs/1.0] instance: sysRegs

Description
ARM Versatile Express System Registers

Limitations
Only select registers are modeled. See user.c for details.

Reference
ARM Motherboard Express ATX V2M-P1 Technical Reference Manual(ARM DUI 0447G), Section 4.3 Register Summary

Licensing
Open Source Apache 2.0

Table 34: Configuration options (attributes) set for instance 'sysRegs'

AttributesValue
SYS_PROCID00x0c000191



Peripheral [arm.ovpworld.org/peripheral/SysCtrlSP810/1.0] instance: sysCtrl

Description
ARM SP810 System Control Registers

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM PrimeCell System Controller (SP810) Technical Reference Manual (ARM DDI 0254)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/dummyPort/1.0] instance: sbpci0

Description
Dummy peripheral that provides an area for accesses.

Limitations
Has no behavior. This peripheral defines a port through which a 4k byte memory area can be read and written.

Licensing
Open Source Apache 2.0

Reference
This is not based upon a real device

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/AaciPL041/1.0] instance: aac1

Description
ARM PL041 PrimeCell Advanced Audio CODEC Interface Registers

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM PrimeCell Advanced Audio CODEC Interface (PL041) Technical Reference Manual (ARM DDI 0173)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/MmciPL181/1.0] instance: mmc1

Description
ARM PrimeCell Multimedia Card Interface (MMCI)

Limitations
None

Licensing
Open Source Apache 2.0

Reference
ARM PrimeCell Multimedia Card Interface (Pl180) Technical Reference Manual (ARM DDI 0172)

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/KbPL050/1.0] instance: kb1

Description
ARM PL050 PS2 Keyboard or mouse controller

Limitations
None

Reference
ARM PrimeCell PS2 Keyboard/Mouse Interface (PL050) Technical Reference Manual (ARM DDI 0143)

Licensing
Open Source Apache 2.0

Table 35: Configuration options (attributes) set for instance 'kb1'

AttributesValue
isKeyboard1
grabDisable1



Peripheral [arm.ovpworld.org/peripheral/KbPL050/1.0] instance: ms1

Description
ARM PL050 PS2 Keyboard or mouse controller

Limitations
None

Reference
ARM PrimeCell PS2 Keyboard/Mouse Interface (PL050) Technical Reference Manual (ARM DDI 0143)

Licensing
Open Source Apache 2.0

Table 36: Configuration options (attributes) set for instance 'ms1'

AttributesValue
isMouse1
grabDisable1



Peripheral [arm.ovpworld.org/peripheral/UartPL011/1.0] instance: uart0

Description
ARM PL011 UART

Limitations
This is not a complete model of the PL011. There is no modeling of physical aspects of the UART, such as baud rates etc.

Reference
ARM PrimeCell UART (PL011) Technical Reference Manual (ARM DDI 0183)

Licensing
Open Source Apache 2.0

Table 37: Configuration options (attributes) set for instance 'uart0'

AttributesValue
variantARM
outfileuart0.log
finishOnDisconnect1



Peripheral [arm.ovpworld.org/peripheral/UartPL011/1.0] instance: uart1

Description
ARM PL011 UART

Limitations
This is not a complete model of the PL011. There is no modeling of physical aspects of the UART, such as baud rates etc.

Reference
ARM PrimeCell UART (PL011) Technical Reference Manual (ARM DDI 0183)

Licensing
Open Source Apache 2.0

Table 38: Configuration options (attributes) set for instance 'uart1'

AttributesValue
variantARM
outfileuart1.log



Peripheral [arm.ovpworld.org/peripheral/UartPL011/1.0] instance: uart2

Description
ARM PL011 UART

Limitations
This is not a complete model of the PL011. There is no modeling of physical aspects of the UART, such as baud rates etc.

Reference
ARM PrimeCell UART (PL011) Technical Reference Manual (ARM DDI 0183)

Licensing
Open Source Apache 2.0

Table 39: Configuration options (attributes) set for instance 'uart2'

AttributesValue
variantARM



Peripheral [arm.ovpworld.org/peripheral/UartPL011/1.0] instance: uart3

Description
ARM PL011 UART

Limitations
This is not a complete model of the PL011. There is no modeling of physical aspects of the UART, such as baud rates etc.

Reference
ARM PrimeCell UART (PL011) Technical Reference Manual (ARM DDI 0183)

Licensing
Open Source Apache 2.0

Table 40: Configuration options (attributes) set for instance 'uart3'

AttributesValue
variantARM



Peripheral [arm.ovpworld.org/peripheral/WdtSP805/1.0] instance: wdt1

Description
ARM SP805 Watchdog Registers.

Limitations
Does NOT model watchdog functionality, just provides registers to allow code to run.

Reference
ARM Watchdog Module (SP805) Technical Reference Manual (ARM DDI 0270)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/TimerSP804/1.0] instance: timer01

Description
Timer SP804 Module

Licensing
Open Source Apache 2.0

Limitations
none

Reference
ARM Dual-Timer Module (SP804) Technical Reference Manual (ARM DDI 0271)

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/TimerSP804/1.0] instance: timer23

Description
Timer SP804 Module

Licensing
Open Source Apache 2.0

Limitations
none

Reference
ARM Dual-Timer Module (SP804) Technical Reference Manual (ARM DDI 0271)

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/SerBusDviRegs/1.0] instance: dvi1

Description
Versatile Express Serial Bus DVI Registers

Licensing
Open Source Apache 2.0

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM Motherboard Express ATX V2M-P1 Technical Reference Manual(ARM DUI 0447G), Section 4.5.8 Two-wire serial bus interface, SBCon

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/RtcPL031/1.0] instance: rtc1

Description
ARM PL031 Real Time Clock (RTC)

Limitations
none

Reference
ARM PrimeCell Real Time Clock (PL031) Technical Reference Manual (ARM DDI 0224)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/CompactFlashRegs/1.0] instance: cf1

Description
ARM Versatile Express Compact Flash Interface Registers

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM Motherboard Express uATX (V2M-P1) Technical Reference Manual (ARM DDI 0447)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/LcdPL110/1.0] instance: clcd

Description
ARM PL110 LCD Controller

Limitations
The VGA display refresh is not optimised resulting in the VGA peripheral causing a limit on the maximum performance of a platform it contains to be around 300 MIPS (actual dependent upon refresh rate of LCD).
The LCD peripheral utilises memory watchpoints to optimise display refresh. This requires the use of ICM memory for the frame buffers, which currently may stop its use in SystemC TLM2 platforms.
Interrupts are not supported

Reference
ARM PrimeCell Color LCD Controller (PL111) Technical Reference Manual (ARM DDI 0293)

Licensing
Open Source Apache 2.0

Table 41: Configuration options (attributes) set for instance 'clcd'

AttributesValue
resolutionxga
noGraphics1



Peripheral [arm.ovpworld.org/peripheral/LcdPL110/1.0] instance: lcd1

Description
ARM PL110 LCD Controller

Limitations
The VGA display refresh is not optimised resulting in the VGA peripheral causing a limit on the maximum performance of a platform it contains to be around 300 MIPS (actual dependent upon refresh rate of LCD).
The LCD peripheral utilises memory watchpoints to optimise display refresh. This requires the use of ICM memory for the frame buffers, which currently may stop its use in SystemC TLM2 platforms.
Interrupts are not supported

Reference
ARM PrimeCell Color LCD Controller (PL111) Technical Reference Manual (ARM DDI 0293)

Licensing
Open Source Apache 2.0

Table 42: Configuration options (attributes) set for instance 'lcd1'

AttributesValue
resolutionxga



Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: lcd1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 43: Configuration options (attributes) set for instance 'lcd1NS'

AttributesValue
mpLoAddress0x10020000
spLoAddress1099780194304
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/DMemCtrlPL341/1.0] instance: dmc1

Description
ARM PL341 Dynamic Memory Controller Registers

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM CoreLink DDR2 Dynamic Memory Controller (DMC-341) Technical Reference Manual (ARM DDI 0418)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: dmc1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 44: Configuration options (attributes) set for instance 'dmc1NS'

AttributesValue
mpLoAddress0x100e0000
spLoAddress1099780980736
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/SMemCtrlPL354/1.0] instance: smc1

Description
PL354 Static Memory Controller

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM PrimeCell Static Memory Controller (PL350 series) Technical Reference Manual (ARM DDI 0380)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: smc1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 45: Configuration options (attributes) set for instance 'smc1NS'

AttributesValue
mpLoAddress0x100e1000
spLoAddress1099780984832
portSize0x1000



Peripheral [ovpworld.org/peripheral/dummyPort/1.0] instance: scc1

Description
Dummy peripheral that provides an area for accesses.

Limitations
Has no behavior. This peripheral defines a port through which a 4k byte memory area can be read and written.

Licensing
Open Source Apache 2.0

Reference
This is not based upon a real device

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: scc1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 46: Configuration options (attributes) set for instance 'scc1NS'

AttributesValue
mpLoAddress0x100e2000
spLoAddress1099780988928
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/TimerSP804/1.0] instance: timer45

Description
Timer SP804 Module

Licensing
Open Source Apache 2.0

Limitations
none

Reference
ARM Dual-Timer Module (SP804) Technical Reference Manual (ARM DDI 0271)

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: timer45NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 47: Configuration options (attributes) set for instance 'timer45NS'

AttributesValue
mpLoAddress0x100e4000
spLoAddress1099780997120
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/WdtSP805/1.0] instance: wdt2

Description
ARM SP805 Watchdog Registers.

Limitations
Does NOT model watchdog functionality, just provides registers to allow code to run.

Reference
ARM Watchdog Module (SP805) Technical Reference Manual (ARM DDI 0270)

Licensing
Open Source Apache 2.0

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: wdt2NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 48: Configuration options (attributes) set for instance 'wdt2NS'

AttributesValue
mpLoAddress0x100e5000
spLoAddress1099781001216
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/TzpcBP147/1.0] instance: tzpc

Description
ARM BP147 TrustZone Protection Controller.
There are 24 output net ports (TZPCDECPROT0_0 thru TZPCDECPROT2_7) corresponding to the 24 enables defined as 3 banks of 8 enables.
Each net port may be used to drive a net connected to a peripheral such as the DynamicBridge which can enable/disable a BusBridge mapping under control of an input net.

Limitations
none

Licensing
Open Source Apache 2.0

Reference
ARM PrimeCell Infrastructure AMBA3 TrustZone Protection Controller (BP147) Technical Overview (ARM DTO 0015)

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/dummyPort/1.0] instance: gpio0

Description
Dummy peripheral that provides an area for accesses.

Limitations
Has no behavior. This peripheral defines a port through which a 4k byte memory area can be read and written.

Licensing
Open Source Apache 2.0

Reference
This is not based upon a real device

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/dummyPort/1.0] instance: faxi1

Description
Dummy peripheral that provides an area for accesses.

Limitations
Has no behavior. This peripheral defines a port through which a 4k byte memory area can be read and written.

Licensing
Open Source Apache 2.0

Reference
This is not based upon a real device

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: faxi1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 49: Configuration options (attributes) set for instance 'faxi1NS'

AttributesValue
mpLoAddress0x100e9000
spLoAddress1099781017600
portSize0x1000



Peripheral [ovpworld.org/peripheral/dummyPort/1.0] instance: saxi1

Description
Dummy peripheral that provides an area for accesses.

Limitations
Has no behavior. This peripheral defines a port through which a 4k byte memory area can be read and written.

Licensing
Open Source Apache 2.0

Reference
This is not based upon a real device

There are no configuration options set for this peripheral instance.


Peripheral [ovpworld.org/peripheral/DynamicBridge/1.0] instance: saxi1NS

Description
DynamicBridge - Dynamically enable/disable a bus bridge from the input slave port to the output master port. The bridge is enabled when the input net is high, disabled when it is low. The size of the port is defined with the portSize parameter. The address on the input slave port is defined by the spLoAddress parameter. The address on the output master port is defined by the mpLoAddress parameter. All three parameters must be specified. The input and output ports may be connected to the same bus.

Licensing
Open Source Apache 2.0

Limitations
The range of the input slave port must not conflict with any exiting port connected to the bus. The output bus width is hard coded to be 32 bits.

Reference
This is not based upon the operation of a real device

Table 50: Configuration options (attributes) set for instance 'saxi1NS'

AttributesValue
mpLoAddress0x100ea000
spLoAddress1099781021696
portSize0x1000



Peripheral [arm.ovpworld.org/peripheral/L2CachePL310/1.0] instance: l2regs

Description
ARM PL310 L2 Cache Control Registers

Licensing
Open Source Apache 2.0

Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.

Reference
ARM PrimeCell Level 2 Cache Controller (PL310) Technical Reference Manual (ARM DDI 0246)

There are no configuration options set for this peripheral instance.


Peripheral [intel.ovpworld.org/peripheral/NorFlash48F4400/1.0] instance: nor0

Description
Intel StrataFlash P30 Memory: 64MB (512-Mbit), 2x16, Top configuration.
Organized in a 2x16 configuration (2 16 bit wide data chips, requiring commands to be repeated in data bits 0:15 and 16:31).
Top configuration (last 4 blocks are 64KB parameter blocks).

Limitations
No flash program timing is modeled, all operations including erase take effect immediately, and suspend commands are NOPs.
Block Locking, Lock-down and OTP (One-Time Programmable) features are not modeled (Blocks are always reported to be unlocked).
Burst-Mode reads and the Read Configuration register are not modeled.
Buffered writes are written immediately, not held until confirm command is issued.

Licensing
Open Source Apache 2.0

Reference
Intel Nor Flash Datasheet as used on Xilinx ML505 board: http://www.xilinx.com/products/boards/ml505/datasheets/30666604.pdf

There are no configuration options set for this peripheral instance.


Peripheral [intel.ovpworld.org/peripheral/NorFlash48F4400/1.0] instance: nor1

Description
Intel StrataFlash P30 Memory: 64MB (512-Mbit), 2x16, Top configuration.
Organized in a 2x16 configuration (2 16 bit wide data chips, requiring commands to be repeated in data bits 0:15 and 16:31).
Top configuration (last 4 blocks are 64KB parameter blocks).

Limitations
No flash program timing is modeled, all operations including erase take effect immediately, and suspend commands are NOPs.
Block Locking, Lock-down and OTP (One-Time Programmable) features are not modeled (Blocks are always reported to be unlocked).
Burst-Mode reads and the Read Configuration register are not modeled.
Buffered writes are written immediately, not held until confirm command is issued.

Licensing
Open Source Apache 2.0

Reference
Intel Nor Flash Datasheet as used on Xilinx ML505 board: http://www.xilinx.com/products/boards/ml505/datasheets/30666604.pdf

There are no configuration options set for this peripheral instance.


Peripheral [smsc.ovpworld.org/peripheral/LAN9118/1.0] instance: eth0

Description
Fully functional Model of SMSC LAN9118 for Arm Versatile Express platforms. For full details please consult README-EMAC.txt

Licensing
Open Source Apache 2.0

Limitations
See README-EMAC.txt

Reference
SMSC LAN9118 High Performance single-chip 10/100 Non-PCI Ethernet Controller Datasheet Revision 1.5 (07-11-08)

There are no configuration options set for this peripheral instance.


Peripheral [philips.ovpworld.org/peripheral/ISP1761/1.0] instance: usb0

Description
Functional Model of USB Phillips ISP1761 for Arm Versatile Explress platforms. For full details please consult README-OTG.txt

Licensing
Open Source Apache 2.0

Limitations
- Only host mode is supported. - DMA modes are not supported for the moment, only the mandatory slave mode is implemented. - Control and bulk transfer types are currently implemented. No interrupt and isochronous transfers yet. - Tested only the attachment of a single host device. The HSOTG controller's root hub has a single port, so only one device can be attached to it. This device could be a hub, though. Currently we support only one non-hub device. - Hot plug events are currently unsupported.

Reference
Philips/NXP

There are no configuration options set for this peripheral instance.


Peripheral [arm.ovpworld.org/peripheral/SmartLoaderArmLinux/1.0] instance: smartLoader

Licensing
Open Source Apache 2.0

Description
Psuedo-peripheral to perform memory initialisation for an ARM based Linux kernel boot: Loads Linux kernel image file and (optional) initial ram disk image into memory. Writes ATAG data into memory. Writes tiny boot code at physical memory base that configures the registers as expected by Linux Kernel and then jumps to boot address (image load address by default).

Limitations
Only supports little endian

Reference
See ARM Linux boot requirements in Linux source tree at documentation/arm/Booting

Table 51: Configuration options (attributes) set for instance 'smartLoader'

AttributesValue
commandmem=1024M raid=noautodetect console=ttyAMA0,38400n8 vmalloc=256MB devtmpfs.mount=0
physicalbase0x60000000
memsize0x40000000
boardid0x8e0



Other Sites/Pages with similar information

Information on the ArmVersatileExpress-CA9 Virtual Platform can also be found on other web sites :
www.ovpworld.org has the library pages http://www.ovpworld.org/library/wikka.php?wakka=CategoryPlatform
www.imperas.com has more information on the model library

A couple of documents (from other related sites that might be of interest)
http://www.ovpworld.org: Function by function Reference Guide for BHM / PPM APIs.
http://www.ovpworld.org: iGen Model Generator Introduction

Two Videos on these models (from other sites)
http://www.ovpworld.org: ARM Bare Metal Demos Video Presentation
http://www.ovpworld.org: RISC-V Bare Metal Demos Video Presentation


Currently available Imperas / OVP Virtual Platforms / Virtual Prototypes.

FamilyVirtual Platform / Virtual Prototype
ARM Based Platforms    BareMetalArm7Single BareMetalArmCortexADual BareMetalArmCortexASingle BareMetalArmCortexASingleAngelTrap BareMetalArmCortexMSingle AlteraCycloneV_HPS ArmIntegratorCP ArmVersatileExpress ArmVersatileExpress-CA15 ArmVersatileExpress-CA9 AtmelAT91SAM7 ArmCortexMFreeRTOS ArmCortexMuCOS-II HeteroArmNucleusMIPSLinux FreescaleKinetis60 FreescaleKinetis64 FreescaleVybridVFxx AlteraCycloneV_HPS ArmIntegratorCP ARMv8-A-FMv1 ArmVersatileExpress ArmVersatileExpress-CA15 ArmVersatileExpress-CA9 AtmelAT91SAM7 ArmCortexMFreeRTOS ArmCortexMuCOS-II ArmuKernel Zynq_PS
MIPS Based Platforms    BareMetalM14KSingle BareMetalMips32Dual BareMetalMips32Single BareMetalMips64Single BareMetalMipsDual BareMetalMipsSingle HeteroArmNucleusMIPSLinux MipsMalta MipsMalta
Vendor Platforms    BareMetalNios_IISingle AlteraCycloneIII_3c120 AlteraCycloneV_HPS AlteraCycloneIII_3c120 AlteraCycloneV_HPS BareMetalArcSingle BareMetalArm7Single BareMetalArmCortexADual BareMetalArmCortexASingle BareMetalArmCortexASingleAngelTrap BareMetalArmCortexMSingle ArmIntegratorCP ArmVersatileExpress ArmVersatileExpress-CA15 ArmVersatileExpress-CA9 ArmIntegratorCP ARMv8-A-FMv1 ArmVersatileExpress ArmVersatileExpress-CA15 ArmVersatileExpress-CA9 AtmelAT91SAM7 AtmelAT91SAM7 FreescaleKinetis60 FreescaleKinetis64 FreescaleVybridVFxx Or1kUclinux ArmCortexMFreeRTOS ArmCortexMuCOS-II HeteroArmNucleusMIPSLinux ArmCortexMFreeRTOS ArmCortexMuCOS-II ArmuKernel ArmuKernelDual Quad_ArmVersatileExpress-CA15 BareMetalM14KSingle BareMetalMips32Dual BareMetalMips32Single BareMetalMips64Single BareMetalMipsDual BareMetalMipsSingle MipsMalta MipsMalta BareMetalOr1kSingle BareMetalM16cSingle BareMetalPowerPc32Single BareMetalV850Single ghs-multi RenesasUPD70F3441 ghs-multi RenesasUPD70F3441 Zynq_PL_DualMicroblaze Zynq_PL_NoC Zynq_PL_NoC_node Zynq_PL_NostrumNoC Zynq_PL_NostrumNoC_node Zynq_PL_RO Zynq_PL_SingleMicroblaze Zynq_PL_TTELNoC Zynq_PL_TTELNoC_node XilinxML505 XilinxML505 zc702 zc706 Zynq Zynq_PL_Default Zynq_PS